45,348 dokumen ditemukan (Menampilkan 1-20 | Halaman 1 dari 2268)
Urutkan
# Judul Penulis Tahun Akses
Jurnal Institusi

Synthesis and Characterization of Titania-Rice Husk Silica Composites as Photocatalyst

Indonesian Journal of Chemistry; Vol 15, No 1 (2015); 36-42
Universitas Gadjah Mada, 2015DOI: 10.22146/ijc.21221http://creativecommons.org/licenses/by-nc-nd/4.0
This article describes the synthesis of titania-silica composites by a sol-gel method using a mixture of silica of rice husk and titanium butoxide sols. Microstructures were examined at calcination temperature in the range of 500 to 700 °C, with tem...
Jurnal Institusi

L-Arginine-Modified Silica for Adsorption of Gold(III)

Indonesian Journal of Chemistry; Vol 15, No 2 (2015); 108-115
Universitas Gadjah Mada, 2015DOI: 10.22146/ijc.21203http://creativecommons.org/licenses/by-nc-nd/4.0
In this research, L-arginine-modified silica (SiO2-Arg) with 3-glycidoxypropyl-trimethoxysilane (GPTMS) as the linking agent has been synthesized through sol gel process for adsorption of Au(III) in aqueous solution. Tetraethyl orthosilicate (TEOS) a...
Jurnal Institusi

Adsorption of Ca(II), Mg(II), Zn(II), and Cd(II) on Chitosan Membrane Blended with Rice Hull Ash Silica and Polyethylene Glycol

Indonesian Journal of Chemistry; Vol 16, No 1 (2016); 45-52
Universitas Gadjah Mada, 2018DOI: 10.22146/ijc.21176http://creativecommons.org/licenses/by-nc-nd/4.0
In this research, chitosan based membrane blended with rice hull ash (RHA) silica and polyethylene glycol (PEG) has been applied as adsorbent of Ca(II), Mg(II), Zn(II) and Cd(II) in an aqueous solution. Membrane was synthesized by blending RHA silica...
Jurnal Institusi

Functionalization of Fe3O4/SiO2 with N-(2-Aminoethyl)-3-aminopropyl for Sorption of [AuCl4]-

Indonesian Journal of Chemistry; Vol 16, No 2 (2016); 130-137
Universitas Gadjah Mada, 2018DOI: 10.22146/ijc.21155http://creativecommons.org/licenses/by-nc-nd/4.0
Synthesis of Fe3O4/SiO2 modified with N-(2-aminoethyl)-3-aminopropyl group (Fe3O4/SiO2/ED) via coating method and its application for adsorption-desorption of anionic gold in aqueous solution have been conducted. The synthesized product was character...
Jurnal Institusi

Wormhole-Like Mesoporous Carbons from Gelatine as Multistep Infiltration Effect

Indonesian Journal of Chemistry; Vol 16, No 3 (2016); 239-242
Universitas Gadjah Mada, 2018DOI: 10.22146/ijc.21137http://creativecommons.org/licenses/by-nc-nd/4.0
Wormhole-like mesoporous carbon from gelatine (WMCG) with two different pore diameters have been synthesized by adopting a modified infiltration treatment. The infiltration effect on the morphology was investigated. The results show that the WMCG sam...
Jurnal Institusi

The Phenolic Compound from Kalanchoe blossfeldiana (Crassulaceae) Leaf and Its Antiplasmodial Activity against Plasmodium falciparum 3D7

Indonesian Journal of Chemistry; Vol 16, No 2 (2016); 156-161
Universitas Gadjah Mada, 2018DOI: 10.22146/ijc.21159http://creativecommons.org/licenses/by-nc-nd/4.0
Various species of Kalanchoe plants have been widely used as raw materials in traditional medicines. This study was the continuation of the researches on secondary metabolites from Indonesia Kalanchoe plants, focused on Kalanchoe blossfeldiana. Fresh...
Jurnal Institusi

Analytical Method Validation and Determination of Pyridoxine, Nicotinamide, and Caffeine in Energy Drinks Using Thin Layer Chromatography-Densitometry

Indonesian Journal of Chemistry; Vol 15, No 1 (2015); 9-15
Universitas Gadjah Mada, 2015DOI: 10.22146/ijc.21217http://creativecommons.org/licenses/by-nc-nd/4.0
Food supplement which contains vitamins and stimulants such as caffeine were classified as energy drink. TLC-densitometry method was chosen to determine the pyridoxine, nicotinamide, and caffeine in the energy drink sample. TLC plates of silica gel 6...
PubMed

Effects of BET Surface Area and Silica Hydrophobicity on Natural Rubber Latex Foam Using the Dunlop Process

Polymers (Basel)
Multidisciplinary Digital Publishing Institute (MDPI), 2024DOI: 10.3390/polym16213076https://creativecommons.org/licenses/by/4.0/
To reinforce natural rubber latex foam, fumed silica and precipitated silica are introduced into latex foam prepared using the Dunlop process as fillers. Four types of silica, including Aerosil 200 (hydrophilic fumed silica), Reolosil DM30, Aerosil R...
PubMed

Silica Deposition in Abaxial Epidermis before the Opening of Leaf Blades of Pleioblastus chino (Poaceae, Bambusoideae)

Ann Bot
Oxford University Press, 2006DOI: 10.1093/aob/mcl014© The Author 2006. Published by Oxford University Press on behalf of the Annals of Botany Company. All rights reserved. For Permissions, please email: journals.permissions@oxfordjournals.org
• Background and Aims Silica deposition is one of the important characteristics of the family Poaceae. The distribution, deposition process and physiology of silica in this family have been extensively investigated. Bamboos among members of Poaceae...
PubMed

Superiority of biomimetic micelle-entrapped nanoporous silica xerogel to deliver poorly water-soluble itraconazole

RSC Adv
Royal Society of Chemistry, 2022DOI: 10.1039/d2ra04698ahttps://creativecommons.org/licenses/by/3.0/
Micelle-entrapped silica xerogel (M-Silica xerogel) was biomimetically synthesized to combine the advantages of micelles and silica xerogel to load poorly water-soluble drug itraconazole (ITZ). Tween 20, tween 40, and tween 80 were applied to prepare...
PubMed

Brief History, Preparation Method, and Biological Application of Mesoporous Silica Molecular Sieves: A Narrative Review

Molecules
Multidisciplinary Digital Publishing Institute (MDPI), 2023DOI: 10.3390/molecules28052013https://creativecommons.org/licenses/by/4.0/
It has been more than 30 years since the first ordered mesoporous silica molecular sieve (MCM-41) was reported, but the enthusiasm for exploiting mesoporous silica is still growing due to its superior properties, such as its controllable morphology, ...
PubMed

Rubber Rail Pad Reinforced by Modified Silica Using GPTMS and Sulfenamide Accelerator

Polymers (Basel)
Multidisciplinary Digital Publishing Institute (MDPI), 2022DOI: 10.3390/polym14091767https://creativecommons.org/licenses/by/4.0/
The interaction between silica and rubber is very important for the production of high performance rubber. Silica surface modification with silane is a general method that aims to enhance the reinforcement efficiency of silica. In this study, a new s...
PubMed

Supported Ionic Liquid Silica as Curing Agent for Epoxy Composites with Improved Mechanical and Thermal Properties

Polymers (Basel)
Multidisciplinary Digital Publishing Institute (MDPI), 2017DOI: 10.3390/polym9100478http://creativecommons.org/licenses/by/4.0/
The present study aims to improve the mechanical properties of epoxy composite by incorporating supported ionic liquid silica (IL-silica). The IL-silica not only showed improved interfacial interaction and reinforcement, but also served as cure agent...
PubMed

Silica-Coated Micrometer-Sized Latex Particles

Langmuir
2023DOI: 10.1021/acs.langmuir.3c00227https://creativecommons.org/licenses/by/4.0/
[Image: see text] A series of silica-coated micrometer-sized poly(methyl methacrylate) latex particles are prepared using a Stöber silica deposition protocol that employs tetraethyl orthosilicate (TEOS) as a soluble silica precursor. Given the relat...
PubMed

Surface Energy Mapping of Modified Silica Using IGC Technique at Finite Dilution

ACS Omega
American Chemical Society, 2020DOI: 10.1021/acsomega.9b03920Copyright © 2020 American Chemical Society This is an open access article published under an ACS AuthorChoice License, which permits copying and redistribution of the article or any adaptations for non-commercial purposes.
[Image: see text] The reinforcing silica filler, which can be more than 40% of an elastomer composite, plays a key role to achieve the desired mechanical properties in elastomer vulcanizates. However, the highly hydrophilic nature of silica surface c...
PubMed

Binding Properties of Methyltrimethoxysilane-Modified Silica Sol Particle Surfaces and Their Molecular Dynamics Simulations

Materials (Basel)
Multidisciplinary Digital Publishing Institute (MDPI), 2025DOI: 10.3390/ma18132974https://creativecommons.org/licenses/by/4.0/
The surface bonding of silica sol particles modified by methyltrimethoxysilane (MTMS) at different temperatures was investigated. Following modification, MTMS hydrolysis products react with silica hydroxyl groups on the surface of silica particles to...
PubMed

Control over Silica Particle Growth and Particle-Biomolecule Interactions Facilitates Silica Encapsulation of Mammalian Cells with Thickness Control

ACS Biomater Sci Eng
Over the last twenty years, many strategies utilizing sol-gel chemistry to integrate biological cells into silica-based materials have been reported. One such strategy, Sol-Generating Chemical Vapor into Liquid (SG-CViL) deposition, shows promise as ...
PubMed

Crystalline silica-exposed human lung epithelial cells presented enhanced anchorage-independent growth with upregulated expression of BRD4 and EZH2 in autocrine and paracrine manners

PLoS One
PLOS, 2023DOI: 10.1371/journal.pone.0285354https://creativecommons.org/licenses/by/4.0/
Crystalline silica-induced inflammation possibly facilitates carcinogenesis. Here, we investigated its effect on lung epithelium damage. We prepared conditioned media of immortalized human bronchial epithelial cell lines (hereinafter bronchial cell l...
PubMed

Seeded-Growth of Silica Rods from Silica-Coated Particles

Langmuir
2019DOI: 10.1021/acs.langmuir.9b02847Copyright © 2019 American Chemical Society This is an open access article published under a Creative Commons Non-Commercial No Derivative Works (CC-BY-NC-ND) Attribution License, which permits copying and redistribution of the article, and creation of adaptations, all for non-commercial purposes.
[Image: see text] Seeded growth of silica rods from colloidal particles has emerged as a facile method to develop novel complex particle structures with hybrid compositions and asymmetrical shapes. However, this seeded-growth technique has been so fa...
PubMed

Inorganic process for wet silica-doping of calcium phosphate

RSC Adv
Royal Society of Chemistry, 2021DOI: 10.1039/d1ra00288khttps://creativecommons.org/licenses/by/3.0/
Silica is not only a biocompatible trace element but also an essential element for bone formation and metabolism. Therefore, it is often doped into bioceramics such as calcium phosphate and calcium carbonate for enhancing biomaterial ability. Heretof...