16,732 dokumen ditemukan
(Menampilkan 1-20 | Halaman 1 dari 837)
Urutkan
#
Judul
Penulis
Tahun
Akses
Jurnal Institusi
Synthesis and Characterization of Alumina Precursors Derived from Aluminum Metal through Electrochemical Method
Indonesian Journal of Chemistry; Vol 15, No 2 (2015); 123-129
This study investigated the use of the electrochemical method to prepare alumina (a-Al2O3) from aluminum metal. The a-Al2O3 precursor was calcined at 110 °C for six hours and then characterized using Fourier Transform Infrared (FTIR) spectroscopy, P...
Jurnal Institusi
Preparation of CaTiO3 Asymmetric Membranes Using Polyetherimide as Binder Polymer
Indonesian Journal of Chemistry; Vol 16, No 1 (2016); 20-24
Asymmetric dense and thin membranes have been prepared from powders of perovskite oxide-type CaTiO3 without cracking by phase inversion method. Polyetherimide was used as a polymeric binder in the method. The resulting green membranes, composed of Ca...
PubMed
Effect of Speed Sintering on Low Temperature Degradation and Biaxial Flexural Strength of 5Y-TZP Zirconia
Molecules
Translucent zirconia is becoming the material of choice for the esthetic restorative material. We aimed to evaluate the surface structure, phase determination, translucency, and flexural strength of 5Y-TZP Zirconia (Katana STML Block and Disc) betwee...
PubMed
Facile preparation of high conductive silver electrodes by dip-coating followed by quick sintering
R Soc Open Sci
With polyol-synthesized silver nanoparticles (AgNPs) as raw materials, the silver electrodes with high conductivity were fabricated via a dip-coating method followed by sintering process, and the effects of the dip-coating and sintering process on th...
PubMed
Optimization of Spark Plasma Sintering Technology by Taguchi Method in the Production of a Wide Range of Materials: Review
Materials (Basel)
This paper reviews the production of sinters using the spark plasma sintering method. SPS (spark plasma sintering) technology has been used for several decades, mainly in laboratories, to consolidate a huge number of both new and traditional material...
PubMed
Simulation and Experimental Study of the Multisized Silver Nanoparticles Sintering Process Based on Molecular Dynamics
Nanomaterials (Basel)
Multisized nanoparticles (MPs) are widely employed as electronic materials to form conductive patterns, benefitting from their excellent sintering properties and mechanical reliability. However, due to the lack of effective detection methods for the ...
PubMed
Evolution Mechanism of Photonically Sintered Nano-Silver Conductive Patterns
Nanomaterials (Basel)
Flash sintering is the most promising sintering method because of its high speed and large area of effect. However, current flash sintering processes exhibit poor stability and the conductive pattern surface is highly susceptible to damage during thi...
PubMed
Simulation of the Internal Temperature Field and Flow Field in a Double-Layer Sintering Bed
ACS Omega
[Image: see text] To meet the requirements of Angang’s blast furnace smelting for sintering output, improve the double-layer sintering process, and determine the appropriate parameters for the double-layer sintering process, this article establishe...
PubMed
Recent Progress in Rapid Sintering of Nanosilver for Electronics Applications
Micromachines (Basel)
Recently, nanosilver pastes have emerged as one of the most promising high temperature bonding materials for high frequency and high power applications, which provide an effective lead-free electronic packaging solution instead of high-lead and gold-...
PubMed
Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system
Sci Rep
We present fast sintering for silver (Ag) nanoparticle (NP) and flake layers printed using roll-to-roll (R2R) gravure printing. An infrared (IR) sintering module was applied to an R2R system to shorten the sintering duration of an R2R gravure-printed...
PubMed
Silicon Carbide Ceramics for Armor Applications: A Review of Sintering Methods and Additive Systems
Molecules
Silicon carbide (SiC) ceramics are among the most attractive materials for lightweight armor because they combine low density (3.0–3.2 g/cm(3)), high hardness, and high thermal and chemical stability; however, their densification remains challengin...
PubMed
Microwave versus conventional sintering on mechanical properties of 3Y-TZP - A systematic review
Bioinformation
This systematic review evaluates the mechanical properties of yttria-stabilized zirconia (3Y-TZP) processed by microwave sintering compared to conventional sintering methods. Zirconia, known for its excellent strength and esthetics, has seen advancem...
PubMed
Effect of Non-Uniform Temperature Field on Sintering Performance of Conductive Silver Paste in Laser Sintering
Materials (Basel)
The non-uniform temperature field in laser sintering critically affects conductive silver paste performance, yet its quantitative relationship with sintering mechanisms remains unclear. This study addresses this issue by proposing effective sintering...
PubMed
Color Characteristics of High Yttrium Oxide–Doped Monochrome and Multilayer Partially Stabilized Zirconia upon Different Sintering Parameters
Eur J Dent
Objectives Sintering influences the optical properties of zirconia. This study examined the effect of altering sintering temperature and time of monochrome (Mo) and multilayer (Mu) 5 mol% yttria-partially stabilized zirconia (5Y-PSZ) on color ch...
PubMed
Design of Controlled Release Non-erodible Polymeric Matrix Tablet Using Microwave Oven-assisted Sintering Technique
J Young Pharm
The objective of the present study was to evaluate the effect of sintering condition on matrix formation and subsequent drug release from polymer matrix tablet for controlled release. The present study highlights the use of a microwave oven for the s...
PubMed
Molybdenum Oxide and Nickel Nitrate as Cooperative Sintering Aids for Yttria-Stabilized Zirconia
Materials (Basel)
The entirely accidental observation of increased sintering performance of nickel-infiltrated yttria-stabilized zirconia (8YSZ) in a molybdenum and oxygen rich atmosphere was explored. Molybdenum and nickel were found to be synergistic sintering aids ...
PubMed
Interface topology for distinguishing stages of sintering
Sci Rep
Sintering is a common process during which nanoparticles and microparticles are bonded, leading to the shrinkage of interstitial pore space. Understanding morphological evolution during sintering is a challenge, because pore structures are elusive an...
PubMed
The effect of deviations in sintering temperature on the translucency and color of multi-layered zirconia
BMC Oral Health
OBJECT: This study aimed to investigate the changes in the translucency and color of four different multi-layered zirconia materials when the sintering temperature were inaccurate. MATERIALS AND METHODS: Two hundred zirconia samples (11 × 11 ...
PubMed
Copper Sintering Pastes with Various Polar Solvents and Acidic Activators
ACS Omega
[Image: see text] Devices in the developing semiconductor market require high density, high integration, and detailed processing. Conventional wire bonding is inappropriate for fine-sized devices, and connected wires can be damaged by heat generation...
PubMed
The Effects of Sintering Temperature and Addition of TiH(2) on the Sintering Process of Cu
Materials (Basel)
In this study, effects of sintering temperature and TiH(2) on the sintering process of Cu are investigated. During sintering, the oxide in Cu decomposes and generates oxygen, which can become trapped in the material forming closed pores. Therefore, t...